About The Overview Screen - Yamaha RIVAGE PM10 Operation Manual

Screen Overview  About the OVERVIEW screen

About the OVERVIEW screen

This screen shows the main parameters of 12 channels selected as a layer.
■ Channel name area
The upper part of the channel name area displays the channel name, channel icon, and the status of
the assigned Cue for the currently-selected twelve channels. The lower part of the channel name area
displays the number, name, channel icon, and the pairing/patching status of the selected channels.
The channel name of the currently-selected channel is highlighted.
Selected channel
Unselected channel
Channel with Isolate ON
Channel with Cue ON
Indicating the status of patching
Indicates L/R channel numbers if the channels are paired.
■ HA GAIN field
You can set the analog gain or digital gain of the HA (head amp) in this field. This field also displays
the operating status of the head amp.
The indication in the field varies depending on the status of patches and the system configuration.
Analog gain parameters
1 GC indicator
If the Gain Compensation function is turned
on, this indicator will appear, showing the
fixed gain value of the signal output to the
TWINLANe network.
2 PRE GC OVER indicator
Lights to indicate that a signal is clipping
before gain compensation.
3 POST GC OVER indicator
Lights to indicate that a signal is clipping after gain compensation.
4 ANALOG GAIN knob
Indicates the analog gain value of the head amp. Use the screen encoder to adjust
the gain. If the Gain Compensation function is turned on, an indicator appears,
showing the analog gain position at the time the function was turned on.
5 +48V indicator
Indicates the phantom power (+48V) on or off status for the head amp. This
indicator is not displayed unless the head amp is patched to the channel.
6
indicator (input channels only)
Indicates the phase setting for the head amp input.
7
M/S indicator
Appears when the M/S Decode Indicator function is enabled.
40
CONTENTS FUNCTION MAP
2 1 3
4
5
6
7
RIVAGE PM10 Operation Manual
FAQ