Maintenance - Yamaha RIVAGE PM10 Operation Manual

Maintenance  Firmware version

Maintenance

Firmware version
You can view a list of the current firmware version number of each component.
Adjusting the faders (FADER CALIB)
Depending on the environment in which you use the system, discrepancies may occur in the motion
of the motorized faders. You can use the Calibration function to correct these discrepancies. The
RIVAGE PM10 system features two types of fader calibration.
Motor Drive Automatically optimizes the motorized fader movement.
Calibration
Positioning Calibrates the motorized fader movement so that the fader knob positions and
Calibration the level values stored in the console (parameter) will match.
NOTE
An alarm message will appear if a problem is detected in the fader settings while the RIVAGE PM10
system is starting up.
1.
Press the SETUP button on the menu bar to access the SETUP screen.
247
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ