Basic Operations On-screen user interface
Faders in the screen are used mainly for visual confirmation of the levels of the corresponding
channels, and will move in tandem when you operate the top panel faders. The current value is
shown in numerical form immediately below the fader.
Knobs in the screen provide visual confirmation of the value of the corresponding parameter.
If you press a knob once in the window, a thick frame appears around the knob. This frame indicates
that the knob is selected for operations that can be controlled by the [TOUCH AND TURN] knob
or screen encoders.
Windows similar to the following enable you to select items from a list, such as the USER DEFINED
knob setting window.
The highlighted item in the middle of the list is the item that is selected for operation. Press the
screen encoders located below the list to scroll the list upward or downward.
You can also scroll the list up or down by using the [TOUCH AND TURN] knob.
RIVAGE PM10 Operation Manual