Meters Using the METER screen
Using the METER screen
By accessing the METER screen (a full screen), you can view the input and output levels of all
channels on the screen, and switch the level meter's metering points (the points in the signal route at
which the level is detected).
INPUT/OUTPUT tabs
Use these tabs to switch between the INPUT METER screen and OUTPUT METER screen.
FULL SCREEN METER (INPUT) screen
This screen shows the meters and faders for all input channels.
FULL SCREEN METER (OUTPUT) screen
This screen shows the meters for all output channels, Stereo A/B, CUE A/B, and MONITOR A/B
simultaneously.
103
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ