Panel Settings Console Lock
Unlocking the console
Press the CONSOLE LOCK screen.
If no password has been set, Console Lock will be defeated.
If a password has been set, the PASSWORD popup window will appear, enabling you to enter
Enter the password and press the OK button.
The console will be unlocked, the system will display the SETUP screen, and the controllers
will be operable once again.
Specifying the CONSOLE LOCK screen image
You can display an image file on the CONSOLE LOCK screen.
In the SAVE/LOAD popup window, specify the image file that you want to display, and then load it
from the USB flash drive. For a procedure on loading a file from a USB flash drive, refer to
a file from a USB flash
Only BMP, JPEG, or PNG image files can be loaded.
RIVAGE PM10 Operation Manual