Usb Flash Drive; File - Yamaha RIVAGE PM10 Operation Manual

File  SAVE/LOAD

File

SAVE/LOAD
You can store and load all data of the RIVAGE PM10 system to and from a USB flash drive
connected to the USB port on the control surface.
NOTE
• You cannot use the RECORDING connector (a USB port dedicated for recording) for save and load
operations.
• The system will recognize only one USB flash drive that is connected to one of the USB ports. Do
not connect multiple USB flash drives.
• The operation of USB 2.0 or 3.0 flash drives only is guaranteed.
• The operation of USB flash drives with capacities of up to 32GB has been verified. (However, this
does not necessarily guarantee the operation of all USB flash drives.) The FAT16 and FAT32 formats
are supported.
NOTICE
"ACCESS" will appear on the status indicator while data is being accessed (i.e., saved, loaded, or
deleted). During this time, do not disconnect the USB port or power-off the control surface. Doing so
may damage the data on the storage media.
Saving the RIVAGE PM10 system's settings on a

USB flash drive

All internal data of the RIVAGE PM10 system can be saved to the USB flash drive in a single
operation as a settings file. The saved file will have an extension of ".PM10ALL".
1.
Press the SETUP button on the menu bar to access the SETUP screen.
2.
Press the SAVE/LOAD button to access the SAVE/LOAD popup window.
216
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ