Yamaha RIVAGE PM10 Operation Manual page 170

Plug-ins  Controlling the parameters of a plug-in
[How INPUT ADJUST works]
Rupert Comp 754
Inversely change in tandem
INPUT GAIN COMPRESSOR/LIMITTER SECTION
COMPRESSOR
INPUT
CIRCUIT
INPUT ADJUST
3 BLEND knob
Adjusts the dry/wet balance of the compressor/limiter.
4 METER SELECT switch
Selects the signal source of the meter as input level, output level, or gain reduction.
5 Meter
Indicates the signal source that you selected in 4.
6 COMPRESS IN switch
Switches the compressor on/off.
7
COMPRESS THRESHOLD knob
Adjusts the threshold of the compressor.
8 COMPRESS RECOVERY knob
Adjusts the release time of the compressor. With the AUTO setting, the release time changes
automatically in the range of 50 ms to 5 sec.
9 COMPRESS RATIO knob
Adjusts the ratio of the compressor.
) COMPRESS GAIN knob
Adjusts the makeup gain of the compressor. This applies before the limiter stage.
! LIMIT IN switch
Switches the limiter on/off.
@ LIMIT THRESHOLD knob
Adjusts the threshold of the limiter.
OUTPUT GAIN
LIMITTER
OUTPUT
CIRCUIT
IN IN
# LIMIT RECOVERY knob
Selects the release time of the limiter. With the AUTO setting, the release time changes
automatically in the range of 50 ms to 5 sec.
$ LIMIT ATTACK switch
Switches the attack time of the limiter. FAST: 2ms, SLOW: 3ms
170
CONTENTS FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ