CH Parameter INSERT/D.OUT (Insert/Direct Out)
Directly outputting an input channel
The signal of an input channel can be directly output from the OUTPUT jack of an I/O device, any
desired OMNI OUT jack, or an output channel of a desired card slot.
In the OVERVIEW screen of the input channel that you want to directly output,
press the INSERT/DIRECT OUT field, or press the DIRECT OUT field in the
SELECTED CHANNEL VIEW screen. The INSERT/D.OUT popup window appears.
INSERT/DIRECT OUT field in the
There are two types of INSERT/D.OUT popup window: 1CH and 12CH D. OUT. Each screen
contains the following items.
DIRECT OUT field in the
SELECTED CHANNEL VIEW screen
INSERT/D.OUT popup window (1CH)
DIRECT OUT point
Enables you to select the signal extraction point as PRE FILTER, PRE EQ, PRE DYN1, PRE
DYN2, PRE FADER, POST FADER, or POST ON.
DIRECT OUT LEVEL knob
Indicates the output level of the Direct Out. You can press this knob, and then use the screen
encoder or the [TOUCH AND TURN] knob to adjust the level.
DIRECT OUT PATCH popup button
Indicates the currently-selected port. If nothing is selected, the button indicates ----. Press this
button to access the patch window.
DIRECT OUT ON button
Switches direct out on/off. The currently-specified Direct Out point is indicated in the lower
part of the button.
RIVAGE PM10 Operation Manual