CH Parameter INSERT/D.OUT (Insert/Direct Out)
Press the INSERT IN patch select popup button to access the INPUT PATCH
Specify the input port that you want to use as the insert in.
If necessary, make insert settings for other channels in the same way.
■ Controlling via the OVERVIEW screen
Press the [VIEW] key to access the OVERVIEW screen.
INSERT/DIRECT OUT field
Press the INSERT/DIRECT OUT field for the channel into which you want to
insert: The INSERT/D.OUT popup window appears.
There are two types of INSERT/D.OUT popup window: 1CH, and 12CH INSERT 1/2. Each
window contains the following items.
INSERT/D.OUT popup window (1CH)
INSERT block [A]–[D] buttons
These buttons represent four plug-ins that have been assigned to INSERT1 and INSERT2
Press one of these buttons to display the edit screen for the assigned plug-in.
RIVAGE PM10 Operation Manual