Download  Print this page

Advertisement

User Setup  CUSTOM FADER
CUSTOM FADER BANK popup window (when a bay is selected)
1
2
3
3
CUSTOM FADER BANK popup window (when MASTER is selected)
5
6
9 )
!
4
7
8
5
6
1
7
8
226
1
Bay select buttons
Enable you to select a bay or master faders to which you want to assign a combination of
channels.
• L1.....................................CUSTOM1 of bay L
• L2.....................................CUSTOM2 of bay L
• C1 ....................................CUSTOM1 of bay C
• C2 ....................................CUSTOM2 of bay C
• R1 ....................................CUSTOM1 of bay R
• R2 ....................................CUSTOM2 of bay R
• MASTER ........................Master fader
2
Bank select buttons
Enables you to select a block you want to set up. The selected bank name will appear in the
CHANNEL ASSIGN field.
3
NAME popup buttons
Press one of these buttons to access the NAME popup window, in which you can name the
blocks.
4
Fader assign indicators
Indicate the channels assigned to the corresponding blocks.
5
Fader select button
Enables you to elect the target fader. Press this button to select it, then press [SEL] keys on the
top panel to add the corresponding channels to the selected fader bank.
6
Channel select popup button
Press this button to access the channel select popup window, in which you can select channels
on the touch screen.
7
CLEAR SELECTED button
Clears the current fader assignment.
8
CLEAR BANK button
Clears the current fader bank assignment. Pressing this button will open a confirmation dialog
box. Press OK to clear the assignment. Otherwise, press CANCEL to return to the previous
screen without changing the setting.
9
COPY button
Copies the selected bank setting.
)
PASTE button
Paste the copied setting to the selected bank.
!
CLOSE button
Press this button to close the popup window and return to the previous screen.
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: