Download  Print this page

Advertisement

Monitor  TALKBACK
2.
Press the TALKBACK popup button to access the TALKBACK SETTINGS popup
window.
In this popup window, you can make detailed settings for talkback.
5
1
2
1
TALKBACK IN field
• TALKBACK IN +48V button
Switches on or off the phantom power (+48V) supplied to the TALKBACK jack.
• TALKBACK IN Ø button
Switches between normal and reverse phase settings for the corresponding head amp.
• ANALOG GAIN knob
Sets the analog gain of the TALKBACK jack. Use the screen encoder to adjust the value.
• TALKBACK IN HPF knob
Sets the cutoff frequency of the HPF for the TALKBACK jack. Use the button to the right of
the knob to switch the HPF on or off.
• TALKBACK IN level meter
Indicates the input level of the mic connected to the TALKBACK jack.
2
INPUT TO TALKBACK field
This field allows a mic connected to a conventional input port to be used as a talkback input. If
you want to use an input jack other than the TALKBACK jack as supplementary input for
talkback, select an input port here, and set the input level and other parameters.
• INPUT TO TALKBACK patch button
Press the button to open the INPUT PATCH popup window, in which you can patch a
desired input port to talkback. The selected port name will appear on the button.
• INPUT TO TALKBACK +48V button
This is an on/off switch for the phantom power (+48V) supplied to an input port.
• INPUT TO TALKBACK Ø button
Sets the phase for the corresponding jack to normal or reverse when you use an input port as
a talkback input.
• INPUT TO TALKBACK gain knob
3
Sets the input gain of the corresponding HA when you use any input port as a talkback
input.
• INPUT TO TALKBACK SILK
4
Adjusts the corresponding SILK setting when you use any input port as a talkback input.
• INPUT TO TALKBACK GC
Turns the corresponding gain compensation on or off when you use any input port as a
talkback input.
• INPUT TO TALKBACK HPF knob
Sets the cutoff frequency for the HPF when you use any input port as a talkback input. Use
the button to the right of the knob to switch the HPF on or off.
• INPUT TO TALKBACK meter
Indicates the level of signals input from the corresponding HA when you use any input port
as a talkback input.
• INPUT TO TALKBACK ON button
Switches talkback on or off when you use any input port as a talkback input.
NOTE
These parameters and meters will not appear if no input port is selected.
3
TALKBACK ON button
Switches talkback on or off.
4
TALK GROUPS field
This field enables you to set the output destination of the talkback signal.
• ASSIGN select button
Specifies the output destination of the talkback signal that is assinged by DEFINE.
• DIM LEVEL FOR BUSES knob
Adjusts the amount by which the talkback signal (that is being output to the selected bus)
will be attenuated.
NOTE
The setting in this field is linked with the setting in the TALKBACK field on the MONITOR screen
(page
93).
5
Tabs
Use these tabs to switch between the TALKBACK SETTINGS popup window and TALK
GROUPS popup window.
94
CONTENTS
FUNCTION MAP
RIVAGE PM10 Operation Manual
FAQ

Advertisement

Table of Contents

   Related Manuals for Yamaha RIVAGE PM10

Comments to this Manuals

Symbols: 0
Latest comments: