User Setup USER DEFINED KEYS
Assigning a function to a USER DEFINED key
Press the SETUP button on the menu bar to access the SETUP screen.
Press the USER DEFINED KEYS button to open the USER DEFINED KEYS popup
BANK A–D tabs
Enable you to select the bank ([A], [B], [C], or [D]) for the USER DEFINED knobs.
USER DEFINED KEYS 1–12
Link to USER DEFINED keys – on the panel. Press one of these buttons to access the
popup window, in which you can assign a function to the selected button.
If nothing is assigned to the button, an indication of "NO ASSIGN" is shown.
Press the button corresponding to the USER DEFINED key to which you want to
assign a function.
The system displays a popup window, in which you can assign a function to the USER
RIVAGE PM10 Operation Manual