Plug-ins Controlling the parameters of a plug-in
Comp276 emulates the characteristics of a sought-after analog compressor commonly used in
recording studios. It produces a thick and solid sound that is suitable for drums or bass.
Adjusts the input level.
Adjusts the ratio of the compressor.
Adjusts the attack time of the compressor.
Adjusts the output gain.
AUTO MAKEUP switch
If this switch is on, the decrease in the output gain when the compressor is applied will be
SIDECHAIN HPF switch
If this switch is on, the compressor applies less to the low-frequency region, strengthening the
Adjusts the release time of the compressor.
Indicate the signal that is selected by the GR/-10/-20/OFF switches.
Select the signal that is monitored by the VU meters.
The amount of gain reduction is shown.
The signal with –10 dBu as 0 VU is shown.
The signal with –20 dBu as 0 VU is shown.
OFF: The VU meter is off.
RIVAGE PM10 Operation Manual