Logging Users Off The Kx Ii-101-V2 (Force Logoff); Adding A New User - Raritan Dominion KX II-101-V2 User Manual

Logging Users Off the KX II-101-V2 (Force Logoff)

If you are an administrator, you are able to log off any authenticated user
who is logged on to the KX II-101-V2. Users can also be disconnected at
the port level. See Disconnecting Users from Ports
To log a user off the KX II-101-V2:
1. Choose User Management > Users by Port. The Users by Port page
opens.
2. Select the checkbox next to the username of the person you want to
disconnect from the target.
3. Click Force User Logoff.
4. Click OK on the Logoff User confirmation message.

Adding a New User

It is a good idea to define user groups before creating KX II-101-V2
users because, when you add a user, you must assign that user to an
existing user group. See Adding a New User Group.
From the User page, you can add new users, modify user information,
and reactivate users that have been deactivated.
Note: A user name can be deactivated when the number of failed login
attempts has exceeded the maximum login attempts set in the Security
Settings page. See Security Settings
To add a new user:
1. Select User Management > Add New User or click Add on the User
List page.
2. Type a unique name in the Username field (up to 16 characters).
3. Type the person's full name in the Full Name field (up to 64
characters).
4. Type a password in the Password field and retype the password in
the Confirm Password field (up to 64 characters).
5. Choose the group from the User Group drop-down list.
If you do not want to associate this user with an existing User Group,
select Individual Group from the drop-down list. For more information
about permissions for an Individual Group, see
for an Individual Group
6. To activate the new user, leave the Active checkbox selected. Click
OK.
Chapter 5: User Management
(on page 140).
Setting Permissions
(on page 88).
(on page 90).
91