Virtual Kvm Client (Vkc) And Active Kvm Client (Akc); About The Active Kvm Client - Raritan Dominion KX II User Manual

Virtual KVM Client (VKC) and Active KVM Client (AKC)

The Virtual KVM Client (VKC) and Active KVM Client (AKC) are
interfaces used to access remote targets. AKC and VKC share similar
features with the exception of the following:

Minimum system requirements

Supported operating systems and browsers

Keyboard macros created in AKC cannot be used in VKC.

Direct port access configuration (see Enabling Direct Port Access
via URL (on page 156))

AKC server certification validation configuration (see Prerequisites
for Using AKC (on page 58))

About the Active KVM Client

AKC is based on Microsoft Windows .NET technology and allows you to
run the client in Windows environments without the use of the Java
Runtime Environment (JRE), which is required to run Raritan's Virtual
KVM Client (VKC) and Multi-Platform Client (MPC). AKC also works with
CC-SG.
Note: If you are using direct port access with AKC, you must open a new
browser window or browser tab for each target you want to access. If you
try to access another target by entering the DPA URL into the same
browser window or browser tab you are currently accessing a target
from, you will not be able to connect and may receive an error.
AKC Supported .NET Framework, Operating Systems and Browsers
.NET Framework
AKC requires Windows .NET
3.5 and 4.0 installed.
Operating Systems
When launched from Internet Explorer
servers via the KX II 2.2 (and later) and the LX 2.4.5 (and later). AKC is
compatible with the following platforms running .NET Framework 3.5:

Windows XP ® operating system

®
Windows Vista operating system (up to 64 bit)

®
Windows 7 operating system (up to 64 bit)
Note: You must be using Windows 7 if WINDOWS PC FIPs is turned
on and you are accessing a target using AKC and a smartcard.
Chapter 3: Working with Target Servers
®
version 3.5 or 4.0. AKC works with both
®
, AKC allows you to reach target
57