User Name; User Group; User Session-Timeout - NETGEAR ProSafe GSM7224P User Manual

user name

Use this command to modify the user name for a local captive portal user. <1-128> is the
user ID and the name is the user name in the range of 1-32 characters. The local user must
exist before you use this command. You can create the local user using user password first.
Format
user <1-128> name name
Mode
Captive Portal Configuration mode

user group

Use this command to associate a group with a captive portal user. A user must be associated
with at least one group so the last group cannot be dis-associated. <1-128> is the user ID
and <1-10> is the group ID.
Default
1
Format
user <1-128>
Mode
Captive Portal Configuration mode
no user group
Use this command to dis-associate a group and user.
Format
no user
Mode
Captive Portal Configuration mode

user session-timeout

Use this command to set the session timeout value for a captive portal user. Use the "no"
form of this command to reset the session timeout to the default. The range of session
timeout is 0-86400. 0 indicates use global configuration.
Default
0
Format
user <1-128> session-timeout timeout
Mode
Captive Portal Configuration mode
no user session-timeout
Use this command to reset the session timeout to the default.
Format
no user <1-128> session-timeout
Mode
Captive Portal Configuration mode
ProSafe Managed Switch
group <1-10>
<1-128> group <1-10>
Captive Portal Commands
t
710