Table of Contents
Advertisement
Operating modes
Mode
Normal
Quiet
Eco-Mode (Off is default):
Data streams
—Supported
—Not supported
Data streams
PCL 6 emulation
PostScript Level III emulation
Version 3011 of the Adobe
definition of PostScript 3 is
supported.
PDF
Supports version 1.6
PPDS
By default, the PPDS interpreter
is inactive. A user can activate
the data stream by PJL or by the
PPDS Emulation setting in the
Configuration Menu
Pict Bridge
Directimage
Devices that support Directimage
support all of the following
graphics formats: TIFF, TIF,
JPEG, JPG, GIF, PNG, BMP,
PCX, and DCX.
Host-Based Printing (HBP)/
Graphics Device Interface
(GDI)
Version 3 (color) uses PCL XL.
1-4
Service Manual
Description
Factory default
Designed for customers where noise levels are a very important
factor.
• Print quality is maintained at factory default level.
• Speed is reduced.
Designed for customers where the environment is a key factor.
There are three options; Energy, Paper, and Energy/Paper.
• Paper
• Duplex is on if Energy/Paper or Paper is selected (duplex
• Energy
• Print quality is maintained.
• Power Saver is set to one minute.
• Fuser standby is off.
• The operator panel back light is off.
• Power supply energy consumption is reduced.
• Energy + Paper
All of the above.
MF920
models only) (can be overwritten by the driver).
MF923
Y112730-2
Advertisement
Table of Contents
