Transfer Section; Detaching And Refitting The Transfer Roller Unit - Olivetti d-Copia 3001MF Service Manual

2K5
1-5-6

Transfer section

(1) Detaching and refitting the transfer roller unit

Follow the procedure below to replace the transfer roller unit.
Procedure
1. Open the left cover 1.
2. Unhook the hooks of the front and rear
transfer bushes and remove the transfer
roller unit.
3. Replace the transfer roller unit and install
the unit.
The front and rear transfer springs must be
firmly mounted on the holder.
1-5-36
Transfer roller unit
Front transfer bush
Left cover 1
Front transfer
bush
Hook
Hook
Front transfer
spring
Holder
Service Manual
Rear transfer bush
Hook
Holder
Figure 1-5-67
Rear transfer
bush
Hook
Rear transfer
spring
Y112040-6