Event Group Commands; Purpose; Commands; Show Rmon Event - Enterasys SecureStack B3 Configuration Manual

Syntax
clear rmon alarm index
Parameters
index
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear RMON alarm entry 1:
B3(rw)->clear rmon alarm 1

Event Group Commands

Purpose

To display and clear RMON events, and to configure RMON event properties.

Commands

For information about...

show rmon event

set rmon event properties
set rmon event status
clear rmon event
show rmon event
Use this command to display RMON event entry properties.
Syntax
show rmon event [index]
Parameters
index
Defaults
If index is not specified, information about all RMON entries will be displayed.
Specifies the index number of entry to be cleared.
(Optional) Displays RMON properties and log entries for a specific entry
index ID.
Event Group Commands
Refer to page...
14-11
14-12
14-13
14-14
SecureStack B3 Configuration Guide 14-11