Show Trace - D-Link DWS-1008 Cli Reference Manual

Defaults: The default trace level is 5.
Access: Enabled.
Examples: Type the following command to trace session manager activity for MAC address
00:01:02:03:04:05:
DWS-1008# set trace sm mac-addr 00:01:02:03:04:05:
success: change accepted.
See Also:
• clear trace

• show trace

show trace
Displays information about traces that are currently configured on the switch, or all possible trace
options.
Syntax: show trace [all]
all Displays all possible trace options and their configuration.
Defaults: None.
Access: Enabled.
Examples: To view the traces currently running, type the following command:
DWS-1008# show trace
milliseconds spent printing traces: 1885.614
Trace Area
-----------------------------------------------------------------------------------------------
dot1x
sm
See Also:
• clear trace
• set trace authentication
• set trace authorization
• set trace dot1x
• set trace sm
D-Link DWS-1008 CLI Manual
Level Mac User
5
5
Port Filter
0
0