Save Filetype - Siemens SCALANCE S615 Configuration Manual

The parameters have the following meaning:
Parameter
ipv4
ipv4-address
port
tcp port
file
filename
filetype
filetype
For information on identifiers of addresses and interfaces, refer to the section "Interface
identifiers and addresses (Page 25)".
Result
The file is loaded on the device from the TFTP server.
Further notes
With the "
2.2.3

save filetype

Description
With this command, you save files on a TFTP server.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
save filetype <filetype> tftp ipv4 <ipv4-address> [port <tcp port (1-65535)>] file
<filename>
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Keyword for an IPv4 address
Value for an IPv4 unicast address
Keyword for the port of the server via
which the TFTP connection runs
Number of the port
Keyword for a file name to be assigned -
Name of the file
Keyword for the file type to be loaded
Name of the file type
show loadsave files
or
cli#
" command, you can display the file types.
Configuration
2.2 Load and Save
Range of values / note
-
Enter a valid IPv4 unicast ad-
dress.
-
1 ... 65535
Default: 69
max. 100 characters
-
max. 100 characters
71