Show Ipsecvpn Information; Show Ipsec Remoteend - Siemens SCALANCE S615 Configuration Manual

Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsec conn-phase2
Result
The configurations are displayed.
9.3.1.5

show ipsecvpn information

Description
This command shows the basic setting of IPsecVPN.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsec information
Result
The settings are displayed.
9.3.1.6

show ipsec remoteend

Description
This command shows the configuration of the remote stations (VPN end point).
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Security and authentication
9.3 IPsec VPN
357