Srv Name Pw - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.9 Proxy server
Requirement
● The proxy server name has been created.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Syntax
Call up the command with the following parameters:
srv name <string(128)> port <number(0-65535)>
The parameters have the following meaning:
Parameter
string
Port
Result
The port has been changed.
Further notes
You display the available proxy server names with the
You create the proxy server with the
6.9.3.6

srv name pw

Description
With this command, you change the password for access to the proxy server.
Requirement
● When selecting the authentication method
● The proxy server name has been created.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
262
Description
Proxy server name
Port number
srv name
Range of values / note
Specify the proxy server
name.
Maximum of 128 characters
Specify the port number on
which the proxy service runs.
0 - 65535
srv show-names
command.
is used.
basic
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.