Functions specific to SCALANCE
3.3 Digital input/output
Syntax
Call the command without parameters:
digital output close
Result
The digital output is closed.
Further notes
You open the digital output with the
You can display the setting of the digital output with the
3.3.3.2
digital output open
Description
This command opens the digital output.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call the command without parameters:
digital output open
Result
The digital output is opened.
Further notes
You close the digital output with the
You can display the setting of the digital output with the
96
command.
digital output open
show digital output
command.
digital output close
show digital output
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command
command