Show Vlan Learning Params - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Network structures
5.1 VLAN
5.1.1.4
show vlan learning params
Description
This command shows the parameters for the automatic learning of addresses for selected or
all VLANs (active and inactive VLANs).
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call up the command with the following parameters:
show vlan learning params[vlan<vlan-range>]
The parameters have the following meaning:
Parameter
vlan
vlan-range
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
Result
The settings for the automatic learning of addresses are displayed.
142
or
cli#
Description
Keyword for a VLAN or VLAN range
Number of the addressed VLAN or VLAN range
Range of values / note
-
1 ... 4094
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
