Network structures
5.1 VLAN
5.1.3.4
no shutdown
Description
With this command, you shut down an interface.
Requirement
You are in the Interface configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Syntax
Call the command without parameters:
no shutdown
Result
The Interface is activated.
Further notes
You deactivate the interface with the
You can display the status of this function and other information with the
interfaces
158
command.
command.
shutdown
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
show