Siemens SCALANCE S615 Configuration Manual page 221

Requirement
You are in the DDNS Client configuration mode.
The command prompt is as follows:
cli(config-ddnsclient)#
Syntax
Call up the command with the following parameters:
password {show-services | <index> <password>}
The parameters have the following meaning:
Parameter
show-services
index
password
Result
The password is configured.
Further notes
You display this setting and other information with the
command.
You configure the user name with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Lists the available providers.
Number corresponding to a specific
provider.
Password
username
Range of values / note
-
Specify a valid number.
Enter the negotiated password.
show ddnsclient information
command.
Network protocols
6.5 DNS
221