Nat-Keep-Alive - Siemens SCALANCE S615 Configuration Manual

Security and authentication
9.3 IPsec VPN
The parameters have the following meaning:
Parameter
yes
no
ifuri
Result
The setting is configured.
Further notes
You display this setting and other information with the show ipsecvpn information command.
9.3.3.5

nat-keep-alive

Description
With this command, you specify the interval at which sign of life frames (keepalives) are
sent.
Requirement
You are in the IPSEC configuration mode.
The command prompt is as follows:
cli(config-ipsec)#
Syntax
Call up the command with the following parameters:
nat-keep-alive <sec(1-10000)>
The parameter has the following meaning:
Parameter
sec
Result
The interval is configured.
362
Description
CRL is used
CRL is not used
Is only used when a CRLURL is de-
fined.
Description
Interval
Range of values / note
-
-
-
Range of values / note
Enter the required interval.
1 ... 10000 sec
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02