No Srv - Siemens SCALANCE S615 Configuration Manual

Further notes
You delete this proxy server with the
You change the parameters with the
You display this setting and other information with the
6.9.3.2

no srv

Description
With this command, you delete a specific proxy server or all proxy servers.
Requirement
● The corresponding proxy server name has been created and is not being used anywhere.
● You are in the PROXYSERVER configuration mode.
The command prompt is as follows:
cli(config-proxysrv)#
Syntax
Call up the command with the following parameters:
no srv {name <string(128)> | all}
The parameters have the following meaning:
Parameter
name
string
all
Result
The specified proxy server is deleted.
Further notes
You create the proxy server with the
You display the available proxy server names with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.
no srv
commands.
srv name...
Description
Keyword for proxy server name
Proxy server name
Deletes all proxy servers
command.
srv name
Network protocols
6.9 Proxy server
show proxyserver table
Range of values / note
-
Specify a valid proxy server
name.
Maximum of 128 characters
-
command.
srv show-names
command.
259