Network protocols
6.5 DNS
The parameters have the following meaning:
Parameter
show-
services
index
Result
The specified entry is enabled.
Further notes
You display this setting and other information with the
command.
You disable an entry with the
6.5.5.2
no service
Description
With this command, you disable the dynamic DNS provider.
Requirement
You are in the DDNS Client configuration mode.
The command prompt is as follows:
cli(config-ddnsclient)#
Syntax
Call up the command with the following parameters:
no service {show-services | <index>}
The parameters have the following meaning:
Parameter
show-
services
index
Result
The specified entry is disabled.
218
Description
Lists the available providers.
Number corresponding to a specific provider.
no service
Description
Lists the available providers.
Number corresponding to a specific provider.
Range of values
-
Specify a valid number.
show ddnsclient information
command.
Range of values
-
Specify a valid number.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02