Completion Of Command Entries - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
1.6.5.3
Completion of command entries
Description
The command interpreter of the Command Line Interface supports you when you enter
commands.
As soon as the first characters of the command have been entered in the input line, the
system can complete the entry as long as the character string is unambiguous.
This can be repeated after entering further characters.
Procedure
Enter the first characters of the command.
Press the tab key.
Result
The command interpreter completes the input as long as the command is unambiguous.
If you enter a character string that cannot be completed to form a command, an error
message is displayed.
● The command is not unique:
● The command is unknown:
● The command is incomplete:
If the entry is not yet complete, enter further characters.
With
Repeat this if necessary until the command is complete and can execute.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
, you obtain a list of the possible commands.
?
% Ambiguous Command
% Invalid Command
% Incomplete command
Description
1.6 General CLI commands
33
Hide quick links:
Advertisement
Table of Contents
