No User-Account; Username - Siemens SCALANCE S615 Configuration Manual

9.1.4.2

no user-account

Description
With this command, you delete a user.
Note
Apart from the users "admin" and "user", they can all be deleted.
Requirement
● The user has been created.
● The user is logged in with the "admin" role.
● You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-account <user-name>
The parameter has the following meaning:
Parameter
user-name
Result
The user has been deleted.
Further notes
You create a user with the
You show the created users with the
9.1.4.3

username

Description
With this command, you change the password of the factory set user "
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
User name
command.
user-account
show user-accounts
Security and authentication
9.1 User rights management
Range of values / note
Enter a valid user name.
command.
".
admin
307