Siemens SL2-141 User Manual
  1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Network Router
  5. SL2-141
  6. User manual

Siemens SL2-141 User Manual

Adsl
Hide thumbs
Table of Contents

Advertisement

Quick Links

SL2-141/SL2-141-I ADSL Router
User's Manual
Rev: 1.5
2007/03/30
No part of this publication may be reproduced in any form by any means without the prior written permission. Other
trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
This manual currently suits for SL2-141/SL2-141-I.

Advertisement

Table of Contents
loading

Related Manuals for Siemens SL2-141

Summary of Contents for Siemens SL2-141

  • Page 1 No part of this publication may be reproduced in any form by any means without the prior written permission. Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies. This manual currently suits for SL2-141/SL2-141-I.

  • Page 2: Safety Notes

    Safety Notes Use only the type of power source indicated on the marking labels. For Installation Use only power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating.

  • Page 3: Fcc Class B Notice

    ADSL Router User Manual This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. FCC Class B Notice This device complies with Part 15 of the FCC Rules.
  • Page 4 Contents...

  • Page 5: Adsl2+ Compliance

    SL2-141/SL2-141-I Wireless ADSL2+ Router is a DSL broadband access device which allows ADSL connectivity while providing 802.11g wireless LAN capabilities for home or office users. It supports ADSL2/ADSL2+ and is backward compatible to ADSL, even offers auto-negotiation capability for different flavors (G.dmt, G.lite, or T1.413 Issue 2) according to central office...

  • Page 6: Atm Features

    ADSL Router User Manual Network Architecture: infrastructure Operating Frequency: 2.4 ~ 2.5 GHz Operating Channels: depending on local regulations. For example, 11Channels (Northern America), 13 Channels (Europe), and 14 Channels (Japan) RF Output Power: 13.5+/-1.5dBm for 802.11g; 17.5+/-1.5dBm for 802.11b The output power can be adjustable.

  • Page 7: Security Features

    ADSL Router User Manual Static routes, RFC1058 RIPv1, and RFC1723 RIPv2 DNS Relay, Dynamic DNS DHCP Client/Relay/Server Time protocol can be used to get current time from network time server Support IGMP Proxy/Snoop Support IP/Bridge QoS for prioritize the transmission of different traffic classes Support port mapping function which allows you to assign all data traffic transmitted among specific Internet connections and LAN ports Security Features...

  • Page 8: Subscription For Adsl Service

    ADSL Router User Manual Subscription for ADSL Service To use the ADSL Router, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be given an Internet account with username and password.

  • Page 9: Chapter 1: Overview

    Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front panel of the ADSL Router (with USB interface and without USB interface):...

  • Page 10: Rear Panel

    ADSL Router User Manual Color Status Description Power off. Power Green Unlit Solid Power on. Rear Panel The following figures illustrate the rear panel of your ADSL Router. Connector Description 12VAC Power connector 12VAC Power switch Ethernet RJ-45 connector Ethernet 1- 4 USB connector (for the model with USB interface only) RJ-11 connector...

  • Page 11: Installation

    Chapter 2: System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the ADSL Router via Ethernet, the host computer must meet the following requirements: With Ethernet network interface. Must have TCP/IP installed. Set client PC with obtain an IP address automatically or set fix IP address. With a web browser installed: Internet Explorer 5.x or later.

  • Page 12: Connecting The Adsl Router

    ADSL Router User Manual Connecting the ADSL Router Follow the steps below to connect the related devices. Connecting the ADSL line. Connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router.

  • Page 13: Install The Usb Driver

    Chapter 3: Configuration For connecting through a hub, please refer to the following diagram for an example. Install the USB Driver For Windows ME Run the USB installation program from the CD provided by your device package. An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step.
  • Page 14 ADSL Router User Manual An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC.

  • Page 15: For Windows Xp

    Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. Now, the system will copy the proper files for this device.
  • Page 16 ADSL Router User Manual When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device.

  • Page 17: For Windows Vista

    Chapter 3: Configuration The system is trying to find proper driver for your device and copying the files automatically. After the file copying is finished, a completing message will appear. You can use the device now. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver installation process (see the figure below for example).
  • Page 18 ADSL Router User Manual When the welcome screen appears, click Next for the next step. When the complete message of InstallShield Wizard appears, click Finish. Link your router and the PC with a USB cable. The system will detect the USB driver automatically.
  • Page 19 Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. After the file copying finished, a completing message will appear. You can use the router now.
  • Page 20 Copy the USB driver folder from the driver CD to somewhere on the PC. (In our example, the driver files are put under D:\Siemens WHQLed.) Open Start menu, key in cmd in the blank and press enter. Then click cmd.
  • Page 21 Chapter 3: Configuration Method Three – If the USB driver has not been installed yet, you can also connect the router to the PC with a USB cable and wait for Universal Plug and Play device to detect the router, and then install the driver.
  • Page 22 ADSL Router User Manual Or if you do not have a disc, but have the driver files on your PC, you can follow the steps below: Press I don’t have the disc. Show me other options. Select Browse my computer for driver software (advanced). Press Browse to set the path for the driver file, and then press Next.
  • Page 23 Chapter 3: Configuration Now the driver software is installed successfully. Press Close to start using the router. To make sure the USB driver for your router is properly installed, please do the following steps. 1. Open the Start menu and press Control Panel. 2.
  • Page 24 ADSL Router User Manual 3. Press System. 4. Click Device Manager. 5. Confirm that the Siemens ADSL Router USB Remote NDIS Device (BCM63xx Based) is...

  • Page 25: Uninstall The Usb Driver

    For Windows ME For uninstall the USB driver, please do the following. The first way: Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok.

  • Page 26: For Windows 2000

    For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu. The InstallShield Wizard dialog will appear.
  • Page 27 Chapter 3: Configuration When the Unsafe Removal of Device screen appears, the USB driver is removed successfully. Click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish.
  • Page 28 ADSL Router User Manual The second way: Choose Settings –Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove.
  • Page 29 Chapter 3: Configuration The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. Then click OK.

  • Page 30: For Windows Xp

    Click Finish. For Windows XP For uninstall the USB driver, there are two ways to do it. Please do as the following: The first way: Choose Programs – Siemens Broadband – Uninstall Siemens ADSL Router USB Driver from the Start menu.
  • Page 31 Chapter 3: Configuration The InstallShield Wizard dialog will appear. A dialog appears to ask you confirm if you want to remove the USB driver or not. Please click Ok. Unplug the USB cable between your device and your PC. When the Unsafe Removal of Device screen appears, the USB driver is removed successfully.
  • Page 32 ADSL Router User Manual The second way: Choose Settings –Control Panel from the Start menu. Choose Add/Remove Programs. A dialog appears to ask you choose the program that you want to remove. Please select Siemens ADSL Router USB Driver and click Change/Remove.
  • Page 33 Chapter 3: Configuration The InstallShield Wizard dialog will appear. Unplug the USB cable between your device and your PC. Then click OK. When the Maintenance Complete screen appears, the USB driver is removed successfully. Click Finish. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver uninstallation process (see the figure below for example).
  • Page 34 ADSL Router User Manual To uninstall the USB driver, there are two ways to do it. Please follow the instructions. Method One: Remove from Device Manager. Choose Start menu, and then select Control Panel. Click System and Maintenance. Press System.
  • Page 35 Chapter 3: Configuration Click Device Manager. Right click Askey ADSL Router USB Remote NDIS Device on the Network adapters list, and press Uninstall. Click OK when the Confirm Uninstall window appears.
  • Page 36 ADSL Router User Manual Remember to unplug the USB cable before continue the uninstallation, or you will see the reminder as follows. Unplug and press OK. When the Confirm Device Uninstall screen show up, check Delete the driver software for the device and click OK to continue. Wait while the system is uninstalling.
  • Page 37 Chapter 3: Configuration Note: If your USB driver is installed by UPnP device, you can only use method one (via the Device Manager) to uninstall, because the installed driver will not be shown on the program list. Unplug your USB cable between your router and your PC. Choose Start menu, and open Control Panel folder.

  • Page 38: Setting Tcp/Ip

    ADSL Router User Manual The USB driver is successfully removed now. Setting TCP/IP In order to access the Internet through the router, each host on your network must install/setup TCP/IP. Please follow the steps below for select a network adapter.

  • Page 39: For Windows 98

    Chapter 3: Configuration For Windows 98 Click on the Start menu, point to Settings and click on Control Panel. Double-click the Network icon The Network window appears. On the Configuration tab, check out the list of installed network components. Option 1: If you have no TCP/IP protocol, click Add.
  • Page 40 ADSL Router User Manual On the left side of the windows, highlight Microsoft and then select TCP/IP on the right side. Then click OK When returning to Network window, highlight TCP/IP protocol for your NIC and click Properties. On IP Address tab: Enable Specify an IP address option.
  • Page 41 Chapter 3: Configuration When returning to Network window, click OK Wait for Windows copying files. When prompted with System Settings Change dialog box, click Yes to restart your computer.

  • Page 42: For Windows Me

    ADSL Router User Manual For Windows ME 1. Click on the Start menu, point to Settings and click on Control Panel. 2. Double-click the Network icon. 3. The Network window appears. On the Configuration tab, check out the list of installed network components.

  • Page 43: For Windows Nt

    Chapter 3: Configuration 9. Wait for Windows copying files. 10. When prompted with the System Settings Change dialog box, click Yes to restart your computer. For Windows NT 1. Click Start, point to Settings, and then click Control Panel. 2. Double-click the Network icon. 3.
  • Page 44 ADSL Router User Manual 5. Click Yes to use DHCP. 6. Insert the Windows NT CD into your CD-ROM drive and type the location of the CD. Then click Continue. 7. Returning to the Network window, you will find the TCP/IP Protocol among the list.
  • Page 45 Chapter 3: Configuration When returning to Network window, click Close. When prompted with Network Settings Change dialog box, click Yes to restart your computer.
  • Page 46 ADSL Router User Manual For Windows 2000 From the Start menu, point to Settings and then click Network and Dial-up Connections. Right-click the Local Area Connection icon and then click Properties. On the General tab, check out the list of installed network components. Option 1: If you have no TCP/IP Protocol, click Install.
  • Page 47 Chapter 3: Configuration Highlight Protocol and then click Add. Click Internet Protocol (TCP/IP) and then click OK. When returning to Local Area Connection Properties window, highlight Internet Protocol (TCP/IP) and then click Properties. Under the General tab, enable Use the following IP Address.
  • Page 48 ADSL Router User Manual For Windows XP From the Start menu, point to Control Panel and then click Network and Internet Connections. Click Network Connection and then click Properties. Click Network Connection and then click Properties.3.On the General tab, check out the list of installed network components.
  • Page 49 Chapter 3: Configuration For Windows Vista Open the Start menu, point to Control Panel and click it. Click Network and Internet. 10. Select Network and Sharing Center.
  • Page 50 ADSL Router User Manual 11. Click Manage Network Connection on the left side. 12. Right click Local Area Connection and select Properties. 13. On the Networking tab, you will find Internet Protocol Version 6 and Version 4. Contact your ISP to confirm which one will be used.

  • Page 51: Configure Pc To Get Ip Address From Dhcp

    Chapter 3: Configuration 14. Under the General tab, select Obtain an IP address automatically, and Obtain DNS server address automatically. Then click Ok to exit. Configure PC to get IP address from DHCP If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should configure the client PCs to obtain a dynamic IP address.
  • Page 52 ADSL Router User Manual On the IP Address tab, select Obtain an IP address automatically. Then click OK. For Windows NT On the IP Address tab, click on the drop-down arrow of Adapter to select required adapter. Enable Obtain an IP address from a DHCP server and then click OK..
  • Page 53 Chapter 3: Configuration Enable Obtain an IP address automatically and then click OK.

  • Page 54: Windows Vista

    ADSL Router User Manual For Windows XP On the IP Address tab, select Obtain an IP address automatically. Then click OK. Windows Vista On the IP Address tab, select Obtain an IP address automatically. Then click OK. Renew IP Address on Client PC There is a chance that your PC does not renew its IP address after the ADSL Router is on line and the PC cannot access the Internet.
  • Page 55 Chapter 3: Configuration 1. Select Run from the Start menu. 2. Type winipcfg in the dialog box and the click OK. 3. When the figure below appears, click Release and then Renew to get an IP address. For Windows NT 1.
  • Page 56 ADSL Router User Manual 3. Type cmd in the dialog box and the click 4. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 5. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to get a new one.
  • Page 57 Chapter 3: Configuration For Windows 2000 1. From the Start menu, point to Programs, Accessories and then click Command Prompt. 2. Type ipconfig at prompt. Then you will see the IP information from DHCP server. 3. If you want to get a new IP address, type ipconfig /release to release the previous IP address and then type ipconfig /renew to get a new one.
  • Page 58 ADSL Router User Manual For Windows Vista 1. Open the Start menu, and type cmd in the text box then click OK. 2. The command prompt window will appear. 3. Type ipconfig at the command window and press Enter to view the computer’s IP information from DHCP server.
  • Page 59 Chapter 3: Configuration Note: If you cannot release the IP address successfully and see the message “The requested operation requires elevation,” please go to the Start menu and right click Command Prompt, then set Run as administrator. Press Continue when a dialog asking for permission to continue prompts.

  • Page 60: Chapter 3: Connecting And Accessing

    Chapter 3:Connecting and Accessing Internet Chapter 3: Connecting and Accessing Internet This chapter is to help you accessing into Internet with a quick and convenient way. If you need more detailed information for web configuration, please get into the next chapter for the advanced configuration. Prior to configuring the ADSL Router, you must decide whether to configure the ADSL Router as a bridge or as a router.

  • Page 61: Ppp Over Atm (Pppoa) Mode

    Chapter 3:Accessing Internet PPP over ATM (PPPoA) Mode Default Private IP Dynamic Public IP 192.168.1.1 assigned by BRAS 192.168.1.3 STM-1 Loop (Internet Service Provider) Ethernet ADSL BRAS DSLAM Router RDAIUS 192.168.1.2 Server PC(S) PPP over ATM *BRAS: Broadband Remote Access Server PPPoA+NAT+DHCP on Private LAN Description:...

  • Page 62: Ppp Over Atm (Pppoa) Ip Extension Mode

    ADSL Router User Manual PPP over ATM (PPPoA) IP Extension Mode Default Private IP 192.168.1.1 Dynamic Public IP assigned by BRAS STM-1 Loop (Internet Service Provider) Ethernet ADSL BRAS DSLAM Router RDAIUS Server PPP over ATM *BRAS: Broadband Remote Access Server PPPoA+NAT+DHCP on Private LAN Description:...

  • Page 63: Ppp Over Ethernet (Pppoe) Mode

    Chapter 3:Accessing Internet PPP over Ethernet (PPPoE) Mode Default Private IP Dynamic Public IP 192.168.1.1 assigned by BRAS 192.168.1.3 STM-1 (Internet Service Provider) Loop Ethernet ADSL BRAS DSLAM Router 192.168.1.2 RDAIUS Server PC(S) PPP over Ethernet *BRAS: Broadband Remote Access Server PPPoE+NAT+DHCP on Private LAN Description:...

  • Page 64: Ppp Over Ethernet (Pppoe) Ip Extension Mode

    ADSL Router User Manual PPP over Ethernet (PPPoE) IP Extension Mode Default Private IP 192.168.1.1 Dynamic Public IP assigned by BRAS (Internet Service Provider) STM-1 Loop Ethernet ADSL DSLAM BRAS Router PC(S) RDAIUS Server PPP over Ethernet *BRAS: Broadband Remote Access Server PPPoE IP Extension Mode Description:...

  • Page 65: Numbered Ip Over Atm (Ipoa)

    Chapter 3:Accessing Internet Numbered IP over ATM (IPoA) Default Private IP 192.168.1.1 10.3.75.51 STM-1 Loop 10.3.75.49 (Internet Service Provider) 10.3.70.1 ADSL BRAS DSLAM Router 10.3.75.50 RDAIUS PC(S) Server IP over ATM *BRAS: Broadband Remote Access Server Public IP Pre-assigned by ISP Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server.
  • Page 66 ADSL Router User Manual Check the network information. Make sure the settings match the settings provided by ISP. Click Finish. Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg: IP Address: 10.3.75.51 Subnet Mask: 255.255.255.248 Gateway: 10.3.75.49 Now the router is well configured.

  • Page 67: Numbered Ip Over Atm (Ipoa)+Nat

    Chapter 3:Accessing Internet Numbered IP over ATM (IPoA)+NAT Description: In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled (on ADSL Router or use another NAT box connected to hub) to support multiple clients to access the Router and some public servers (WWW, FTP).
  • Page 68 ADSL Router User Manual LAN. Primary IP Address: 192.168.1.1 Subnet mask: 255.255.255.0 Start IP Address: 192.168.1.2 End IP Address: 192.168.1.254 Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next. Secondary IP Address: 10.3.75.49 Subnet mask: 255.255.255.248 Check the network information.

  • Page 69: Unnumbered Ip Over Atm (Ipoa)

    Chapter 3:Accessing Internet Unnumbered IP over ATM (IPoA) Default Private IP 192.168.1.1 10.3.75.51 STM-1 Loop 10.3.75.49 (Internet Service Provider) ADSL BRAS DSLAM Router 10.3.75.50 RDAIUS PC(S) Server IP over ATM *BRAS: Broadband Remote Access Server Public IP Pre-assigned by ISP Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server.
  • Page 70 ADSL Router User Manual Set TCP/IP for your computer. Specify an IP Address, subnet mask and set default gateway. eg: IP Address: 10.3.75.51 Subnet Mask: 255.255.255.248 Gateway: 10.3.75.49 Now the router is well configured. You can access into Internet.

  • Page 71: Unnumbered Ip Over Atm (Ipoa)+Nat

    Chapter 3:Accessing Internet Unnumbered IP over ATM (IPoA)+NAT Description: If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL Router and public server, e.g., Web or FTP server. Typically the first IP is network address, the second is used as router IP address and the last one is subnet broadcasting.
  • Page 72 ADSL Router User Manual Start IP Address: 192.168.1.2 End IP Address: 192.168.1.254 Check Configure the second IP Address and Subnet Mask for LAN Interface and type in the second IP address and subnet mask. Then click Next. Secondary IP Address: 10.3.75.49 Subnet mask: 255.255.255.248 Check the network information.

  • Page 73: Bridge Mode

    Chapter 3:Accessing Internet Bridge Mode Default Private IP 192.168.1.1 Loop STM-1 (Internet Service Provider) PPPoE Client S/W ADSL BRAS DSLAM Router RDAIUS Server PC(S) PPP over Ethernet *BRAS: Broadband Remote Access Server Bridge Mode Description: In this example, the ADSL Router acts as a bridge which bridging PC IP address from LAN to WAN. PC IP address can be a static public address that is pre-assigned by ISP or a dynamic public address that is assigned by ISP DHCP server, or can be got from PPPoE software.

  • Page 74: Chapter 4: Web Configuration

    Chapter 5:Connection Mode Chapter 4: Web Configuration Some users might want to set specific configuration for the router such as firewall, data transmission rate… and so on. This chapter will provide you advanced information of the web pages for the router for your reference. Using Web-Based Manager Once your host PC is properly configured, please proceed as follows: 1.

  • Page 75: Outline Of Web Manager

    Chapter 5:Connection Mode Outline of Web Manager For configure the web page, please use admin as the username and the password. The main screen will be shown as below. Title: It indicates the title of this management interface. Main Menu: Includes Quick Start, Status, Advanced, Wireless and Management.

  • Page 76: Quick Start

    ADSL Router User Manual Quick Start The pages for the Quick Start provide user a quick way to set for the router. If you do not know more about the router, you can use the Quick Start pages to adjust basic settings to make your router activating.
  • Page 77 Chapter 5:Connection Mode After clicking on the Next button from the VPI/VCI web page, the following screen will appear. Please choose the connection type and encapsulation mode that you want to use and click Next for next page. For example, PPP over Ethernet (PPPoE) in this screen is selected.

  • Page 78: Ppp Over Atm/ Ppp Over Ethernet

    ADSL Router User Manual PPP over ATM/ PPP over Ethernet If the type you choose is PPP over ATM or PPP over Ethernet, please refer to the following information. According to the ISP’s configuration on the server, you can choose PPPoE and PPPoA modes.
  • Page 79 Chapter 5:Connection Mode PPP Username: Type in the username that you got from your ISP. PPP Password: Type in the password that you got from your ISP. Always On: Check this button to make the connection is always active. Dial on Demand: Click this button to make a connection while Please type the username and password that you got in demand.
  • Page 80 ADSL Router User Manual PCs. Start IP Address: Type in the start point IP address. End IP Address: Type in the end point IP address. Leased Time: Type in the duration for the time. The default is 1day. DHCP Server Off: Check this item if DHCP service isn’t needed on the LAN.

  • Page 81: Ip Over Atm

    Chapter 5:Connection Mode IP over ATM If the type you have to choose is IP over ATM, please refer to the following information. IPoA is an alternative of LAN emulation. It allows TCP/IP network to access ATM network and uses ATM quality of service’s features.
  • Page 82 ADSL Router User Manual In the Configure LAN side Settings web page, you have to fill in the data requested here. Primary IP Address: Type in the first IP address that you got from your ISP for your LAN connection. Subnet Mask: Type in the subnet mask that you got from your ISP for your LAN connection.
  • Page 83 Chapter 5:Connection Mode Now, the system will reboot to activate the new settings that you have done in this section. Please wait for 2 minutes for restarting the router.
  • Page 84 ADSL Router User Manual Bridging If the type you choose is Bridging, please refer to the following information. The bridging mode can configure your router to send packets received on any port such as ATM PVC or Ethernet with a broadcast MAC address to all other ports.
  • Page 85 Chapter 5:Connection Mode Primary IP Address: Type in the IP address that you got from your ISP for LAN interface. Subnet Mask: Type in the subnet mask that you got from your ISP for LAN interface. MTU: It means the maximum size of the packet that transmitted in the network.
  • Page 86 ADSL Router User Manual Status Overview This page is displaying the current status for the DSL connection. It includes if the wireless network is enabled or not, lists the LAN IP address, default gateway, DNS servers IP address, firmware version, the period of activating the router, and so on. The system status will be changed according to the settings that you configured in the web pages.

  • Page 87: Adsl Line

    Chapter 5:Connection Mode ADSL Line This page shows all information for ADSL. For knowing the quality of the ADSL connection, please click ADSL BER Test button to have advanced information. Click More Information to show more detailed information about ADSL Line Status.

  • Page 88: Internet Connection

    ADSL Router User Manual When the test is over, the result will be shown on the following dialog for your reference. Click Close to close this dialog. Internet Connection This page displays the connection information for your router, such as PVC name, category, protocol, invoking NAT or not, IP address, link status and so on.

  • Page 89: Wireless Client

    Chapter 5:Connection Mode Wireless Client This table shows the MAC address for all of wireless LAN clients currently associated to your DSL Router. Routing Table This table shows the routing method that your router uses. ARP Table This table shows the IP address record for IP-to-Physical translation in your router.

  • Page 90: Local Network - Dhcp Server

    ADSL Router User Manual Advanced Setup Local Network- IP Address This page is the same as you can see in the Configure LAN side Settings page while running the Quick Setup. It allows you to set IP Address and Subnet Mask values for LAN interface. Primary IP Address: Type in the first IP address that you got from your ISP for your LAN connection.
  • Page 91 Chapter 5:Connection Mode DHCP Server On: Check this item if DHCP service is needed on the LAN. The router will assign IP address, gateway address for each of your PCs. Start IP Address: Type in the start point IP address. End IP Address: Type in the end point IP address.
  • Page 92 ADSL Router User Manual The new one will be shown on the dialog right away. That is, the specified address will be reserved and not be assigned by DHCP for other computer.

  • Page 93: Local Network - Upnp

    Chapter 5:Connection Mode Local Network – UPnP The UPnP is available only for Windows XP. If you are not user of Windows XP, this page does not have any meaning to you. This page allows you to enable the UPnP function through the web page for your router.
  • Page 94 ADSL Router User Manual If you choose Non Realtime VBR, you have to type in the following data. The range for Peak Cell Rate is from 1 to 1690. The range for Sustainable Cell Rate is from 1 to 1689 and must be smaller than Peak Cell Rate.

  • Page 95: Internet-Dns Server

    Chapter 5:Connection Mode Internet-DNS Server If Enable Automatic Assigned DNS checkbox is selected, this router will accept the first received DNS assignment from one of the PPPoA, PPPoE or MER/DHCP enabled PVC(s) during the connection establishment. If the checkbox is not selected, it is necessary for you to enter the primary and optional secondary DNS server IP addresses.

  • Page 96: Internet - Adsl Settings

    ADSL Router User Manual Internet - ADSL Settings Enable ADSL Port: Check this box to enable this function. It simply invokes the line mode that you choose here for the router. Select the support of line modes: There are several selections for your choosing.

  • Page 97: Configuring Other Routers On Your Lan

    Chapter 5:Connection Mode Allow you to remove the selected static route settings. Adding a New One To add a static route, please choose Static Route - Add. Type the destination network address, subnet mask and gateway that you get from ISP and click Apply. Destination Network Address: The destination IP address of the network where data packets are to be sent.

  • Page 98: Ip Routing - Dynamic Routing

    ADSL Router User Manual For a router with a direct connection to the Router’s local Router, the Gateway IP Address is the address of the Router’s local router. For routers which must forward packets to another router before reaching the Router’s local router, the Gateway IP Address is the address of the intermediate router.
  • Page 99 Chapter 5:Connection Mode different interface. Otherwise, disable this function. Click Apply to invoke the settings set here.

  • Page 100: Virtual Server-Port Forwarding

    ADSL Router User Manual Virtual Server-Port Forwarding The Router implements NAT to let your entire local network appear as a single machine to the Internet. The typical situation is that you have local servers for different services and you want to make them publicly accessible.

  • Page 101: Ip Address Seen By Internet Users

    Chapter 5:Connection Mode IP Address seen by Internet Users Please note that, in the above picture, both Internet users are connecting to the same IP address, but using different protocols. To Internet users, all virtual servers on your LAN have the same IP Address. This IP Address is allocated by your ISP.

  • Page 102: Connecting To The Virtual Servers

    ADSL Router User Manual From Internet Host IP Address: Select the initial place for port forwarding. If you choose SINGLE, a box will appear for you to fill in the IP address for the specific host. And, if you choose SUBNET, the boxes of IP and Subnet will appear for you to fill in the IP address and subnet mask for the specific host as the start point.

  • Page 103: Virtual Server - Dmz Host

    Chapter 5:Connection Mode Or define by yourself by typing the words into the field of User defined. Click Apply to complete the setting. Virtual Server - DMZ Host Direct Mapping Zone (DMZ) uses a technology that makes Router forwarding all incoming packet to internal specific server.

  • Page 104: Virtual Server - Dynamic Dns

    ADSL Router User Manual Virtual Server - Dynamic DNS The Dynamic DNS (Dynamic Domain Nasme System) combines both functions of DNS and DHCP to map a dynamic IP into a fixed domain name. This page allows you to access into virtual servers with a domain name and password.
  • Page 105 Chapter 5:Connection Mode Firewall The firewall is a software that interrupts the data between the Internet and your computer. It is the TCP/IP equivalent of a security gate at the entrance to your company. All data must pass through it, and the firewall (functions as a security guard) will allow only authorized data to be passed into the LAN.
  • Page 106 ADSL Router User Manual Then, to add a new IP Filtering, click Add. This page provides some settings for you to adjust for adding a new outbound IP Filtering. Allow Traffic: No stops the data transmission, Yes lets the data pass through. Protocol: Here provide several default policies for security levels for you to choose.

  • Page 107: Quality Of Service

    Chapter 5:Connection Mode A new IP filtering setting for Outbound traffic is created in the web page. To edit the setting, please click the pencil mark to get into the editing page. To delete the setting, click the trash mark to erase it. To set another IP filtering, click Add again.
  • Page 108 ADSL Router User Manual is the default setting. IP type of Service: The system provides some types of service for you to choose. The meaning of each type is the same as the denotation. The default one is No change. IPQoS To classify the upstream traffic by assigning the transmission priority of the data for...

  • Page 109: Port Mapping

    Chapter 5:Connection Mode you want to invoke the QoS traffic rule. Destination Port: Type in the destination port for the traffic rule. The range is from 0 to 65535. Traffic Priority: There are three options – Low, Medium, and High that you can choose. It decides the order of each data transmitted through this device.
  • Page 110 ADSL Router User Manual Group Name: Type in a name here as a group name. It must be unique. The word length must not be over the length of the field. Available Interfaces: The available interfaces (such as Ethernet, USB, wireless, etc.) will be displayed in the left side box.
  • Page 111 Chapter 5:Connection Mode Wireless The Wireless setting must match the other Wireless stations. Basic To set the basic configuration for the wireless features, please open Basic item from the Wireless menu. Enable Wireless Network: Click this check box to enable the wireless network function.
  • Page 112 ADSL Router User Manual Transmission Rate: It decides the speed of data transmission. Choose any one of it by using the drop-down menu. This setting will change by the transmission mode that you set above. If you choose 802.11b only as the transmission mode, the transmission rate settings include 1, 2, 5.5, 11Mbit/s and auto.
  • Page 113 Chapter 5:Connection Mode Security To configure security features for the Wireless interface, please open Security item from Wireless menu. This web page offers four authentication protocols for you to secure your data while connecting to networks. There are four selections including None WPA, 802.1X,WPA, and WPA-PSK.
  • Page 114 ADSL Router User Manual Shared Key means that a bridge or router will send an unencrypted text string to any client attempting to communicate with the router. The client requesting authentication encrypts the text and sends back to the router. Both unencrypted and encrypted can be monitored, yet it leaves the bridge open to attack from any intruder if he...
  • Page 115 Chapter 5:Connection Mode text and sends back to the router. Both unencrypted and encrypted can be monitored, yet it leaves the bridge open to attack from any intruder if he calculates the WEP key by comparing the text strings That is why shared key authentication can be less secure than open authentication.
  • Page 116 ADSL Router User Manual For 802.1X Wireless Network When a wireless client requests access to a network, it is required to be authenticated by a central authentication server (RADIUS Server). Only an authenticated user can be granted by the network access and thereby unauthorized is blocked.
  • Page 117 Chapter 5:Connection Mode Authentication Mechanism For WPA (Wi-Fi Protected Access) WiFi-Protected Access: The WPA is suitable for enterprises. It must be used in conjunction with an authentication server such as RADIUS to provide centralized access control and management. It can provides stronger encryption and authentication solution than others WPA mode.
  • Page 118 ADSL Router User Manual For WPA-PSK/WPA2-PSK/Mixed WPA-PSK WiFi-Protected Access: WPA-PSK is useful for small places such as home environment without having authentication servers. It allows the use of manually-entered keys or passwords and is designed to be easy to set up for home users. Format: Choose the typing method of encryption key.
  • Page 119 Chapter 5:Connection Mode For WPA-2 (Wi-Fi Protected Access)/For Mixed WPA2/WPA WiFi-Protected Access: The WPA2 is suitable for enterprises. It must be used in conjunction with an authentication server such as RADIUS to provide centralized access control and management. It can provides stronger encryption and authentication solution than others WPA mode.
  • Page 120 ADSL Router User Manual RADIUS-authentication port described in RFC 2138. Earlier RADIUS clients use port 1945. The default value will be shown on this box. You can keep and use it. RADIUS Share Secret: A share secret is like a password, which is used between IAS and the specific RADIUS client to verify identity.

  • Page 121: Access Controls

    Chapter 5:Connection Mode Access Controls The web page allows you to enable the wireless MAC control configuration. Access Control: Click Off to disable this function. Click On in Allow mode to make any wireless MAC address can be linked to. And click On in Deny mode to disturb any wireless MAC address to be linked to.
  • Page 122 ADSL Router User Manual Repeater The web page allows you to configure the wireless distribution system for the wireless network. AP Mode: Choose either one of the selection as the AP mode. Search Other Repeaters: Click the Scan Now button to scan search other repeater in the wireless network.
  • Page 123 Chapter 5:Connection Mode Management Diagnostics To check the link status for the network and your computer, a diagnostic test can guide you to detect the network problem. The testing items are listed and accomplished one by one. If the previous one is failed, than the items below that failed one will be failed too.

  • Page 124: Admin Account

    ADSL Router User Manual Admin Account This page allows you to type in the password for accessing into your DSL Router. For the Admin Account, the default setting for user password is admin. If you want to change the username and the password, please retype the new password in the Confirm field for confirmation.

  • Page 125: Interntet Time

    Chapter 5:Connection Mode Interntet Time The router’s clock must synchronize with global Internet’s time. The time you set in the screen will be adapted to system log. Update: Click this button to refresh the current time. Set Time by: The default setting is Manual. If you select Time Server, you don’t need to type in the time setting manually.

  • Page 126: Viewing System Log

    ADSL Router User Manual There are 8 types for log level and display level for your choose. The default is Debugging. The mode selection includes Local, Remote and Both. The default one is Local. If you choose Remote or Both, all the events will be sent to the specified UDP port of the specified log server.

  • Page 127: Snmp Setting

    Chapter 5:Connection Mode SNMP Setting The SNMP, the abbreviation of Simple Network Management Protocol, is used to refer to a collection of specifications for network management that include the protocol itself, the definition of data structures and associated concepts. A management station performs the monitoring function by retrieving the value of MIB objects. The management station and agents are linked by a network management protocol that is SNMP.

  • Page 128: Backup Config

    ADSL Router User Manual workstation by way of SNMP agent. Backup Config To backup your configuration for the router to your computer, you can use Backup Config web page to save the settings. And when you want to restore the settings in the future, simply open Backup Config web page and use Browse button to locate the file and click Restore.

  • Page 129: Upnp For Xp

    Chapter 5:Connection Mode UPnP for XP Universal plug and play (UPnP) is an architecture for pervasive peer to peer network connectivity of intelligent appliances and PCs of all form factors. It is designed to bring easy-to-use, flexible, standards-based connectivity to ad-hoc or unmanaged networks whether in the home, in a small business, public spaces, or attached to the Internet.
  • Page 130 ADSL Router User Manual 7. Now, the NAT traversal function will be provided. The ADSL router will create a new virtual server automatically for mapping while the router detecting the computer running some Internet applications.

  • Page 131: Chapter 5: Troubleshooting

    Chapter 5:Troubleshooting Chapter 5: Troubleshooting If the suggested solutions in this section do not resolve your issue, contact your system administrator or Internet service provider. Problems with LAN PCs on the LAN cannot get IP addresses from the ADSL Router. The chances are that the interface used as DHCP server is modified and the client PCs do not renew IP addresses.

  • Page 132: Problems With Upgrading

    ADSL Router User Manual Request time out Then the DNS is not reachable. Check your DNS setting on the ADSL Router. Problems with Upgrading The following lists the error messages that you may see during upgrading and the action to take. Error: All the ADSL LEDs light up and cannot light off as usual.

  • Page 133: Chapter 6: Glossary

    Chapter 6: Glossary Chapter 6: Glossary ARP (Address Resolution Protocol ) ARP is a TCP/IP protocol for mapping an IP address to a physical machine address that is recognized in the local network, such as an Ethernet address. A host wishing to obtain a physical address broadcasts an ARP request onto the TCP/IP network.

  • Page 134: Private Ip Address

    ADSL Router User Manual configured and mapped to a private workstation address when accesses are made through the gateway to a public network. For example, the ADSL Router is assigned with the public IP address of 168.111.2.1. With NAT enabled, it creates a Virtual LAN. Each PC on the Virtual LAN is assigned with a private IP address with default value of 192.168.1.2 to 192.168.2.254.
  • Page 135 Chapter 7: Glossary the cells belonging to the same connection can be distinguished. A unique and separate VPI/VCI identifier is assigned in advance to indicate which type of cell is following, unassigned cells, physical layer OAM cells, metasignaling channel or a generic broadcast signaling channel.
  • Page 136 ADSL Router User Manual...

  • Page 137: Appendix A: Specifications

    Appendix A: Specifications Appendix A: Specifications Interface One RJ-11 port for ADSL connection Four RJ-45 ports for IEEE 802.3/802.3u 10/100 Base-T auto-sensing and auto-crossover Ethernet connection One USB client port compliant to USB 1.1 On-board wireless LAN module for IEEE 802.11g (2.4 GHz) wireless LAN connection One hidden reset button for restoring to factory default settings...
  • Page 138 ADSL Router User Manual...

  • Page 139: Appendix B: Server Setup For 802.1X Client

    Appendix B: Server Setup for 801.x Client Appendix B: Server Setup for 802.1x Client Getting Client Certificate Please connect the client to a network that doesn’t require port authentictaion. Open up Microsoft Explorer in Windows XP, and go to http://<yourserver>/certsrv. Authenticate to the server using your account that you created at the end of the server setup.
  • Page 140 ADSL Router User Manual Make sure that User certificate request: User Certificate is selected, and click Next. Click Submit in this dialog. Now, you'll see status messages on the screen, then your certificate will be returned to you. Click Install this certificate.

  • Page 141: Enable 802.1X Authentication And Encryption For Wireless Card

    Appendix B: Server Setup for 802.1x Client Enable 802.1x authentication and Encryption for wireless card Open up the properties for your wireless connection, either by right-click on My Network Places on the desktop, select Properties, or Open up the Control Panel, select Network Connections (located under Network and Internet Connections if in Category View)
  • Page 142 ADSL Router User Manual Select Data encryption (WEP enabled), and ensure The key is provided for me automatically is also selected. Now you're ready to configure your router (AP) with 802.1x authentication.
  • Page 143 Appendix B: Server Setup for 801.x Client...

  • Page 144: Appendix C: Weee - B2C

    For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service, the shop where you purchased the product or your SIEMENS partner. The statements quoted above are only fully valid for equipment which is installed in the countries of the European Union and is covered by the directive 2002/96/EC.

This manual is also suitable for:

Sl2-141-i

Table of Contents