Tftp Load - Siemens SCALANCE S615 Configuration Manual

The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
name
filename
Result
The file types are displayed or the file type is assigned a name.
Further notes
With the "
2.2.5.3

tftp load

Description
With this command, you load a file from a TFTP server into the file system of the device. The
TFTP protocol is used for the transfer. You can also display a list of available files.
Requirement
● The name of the file is specified
● You are in the LOADSAVE configuration mode.
The command prompt is:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp load{showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Shows the available files
Keyword for a file type to be assigned
a name
Name of the file type
Keyword for a file name to be assigned
to the file type
Name of the file
" command, you can display the file types.
show loadsave files
Description
Shows the available files
Keyword for a file type to be loaded
Name of the file type
Configuration
2.2 Load and Save
Range of values / note
-
-
max. 100 characters
-
max. 100 characters
Range of values / note
-
-
max. 100 characters
75