The parameters have the following meaning:
Parameter
name
string
all
Result
The relevant protocol is deleted.
Further notes
You create a protocol with the
You display the available protocol names with the
9.2.4.36
proto show-names
Description
With this command, you display the available protocol names.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
proto show-names
Result
The protocol names are listed.
Further notes
You create a protocol with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Keyword for a protocol name
Protocol name
Deletes all protocol names
command.
proto name
command.
proto name
Security and authentication
Range of values / note
-
Specify a valid protocol
name.
Maximum of 32 characters
-
command.
proto show-names
9.2 Firewall
347