Username; Password - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Network protocols
6.5 DNS
6.5.5.4
username
Description
With this command, you configure the user name with which the device logs on to the
dynamic DNS server.
Requirement
You are in the DDNS Client configuration mode.
The command prompt is as follows:
cli(config-ddnsclient)#
Syntax
Call up the command with the following parameters:
username {show-services | <index> <username>}
The parameters have the following meaning:
Parameter
show-services
index
username
Result
The user name is configured.
Further notes
You display this setting and other information with the
command.
You configure the password with the
6.5.5.5
password
Description
With this command, you configure the password with which the device logs on to the
dynamic DNS server.
220
Description
Lists the available providers.
Number corresponding to a specific
provider.
User names
command.
password
Range of values / note
-
Specify a valid number.
Specify the negotiated user name.
show ddnsclient information
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
