Ike-Keytries; Ike-Lifetime - Siemens SCALANCE S615 Configuration Manual

Further notes
You display this setting and other information with the
You disable the use of the default list with the
9.3.7.12

ike-keytries

Description
With this command, you configure the number of repetitions for a failed connection
establishment.
Requirement
You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:
cli(config-conn-phs1)#
Syntax
Call up the command with the following parameters:
ike-keytries <num(0-100)>
The parameter has the following meaning:
Parameter
num
Result
The number of times configured.
Further notes
You display this setting and other information with the
9.3.7.13

ike-lifetime

Description
With this command, you configure a period to specify the lifetime of the agreed keys. When
the time expires, the key is renegotiated.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
no default-ciphers
Description
Period for DPD queries
Security and authentication
show ipsec conn-phase1
command.
Range of values / note
Enter the required number.
With 0 there is no limit to the
number of attempts to establish
the connection.
show ipsec conn-phase1
9.3 IPsec VPN
command.
command.
395