Siemens SCALANCE S615 Configuration Manual page 308

Security and authentication
9.1 User rights management
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
username {admin} password <passwd>
The parameters have the following meaning:
Parameter
admin
password
passwd
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the password in Trial mode, this change is saved immediately.
Further notes
You create a user with the
You delete a user with the
You show the created users with the
308
Description
User name
Keyword for a password
Value for the password
command.
user-account
command.
no user-account
show user-accounts
Range of values / note
Specify the user name.
-
Enter the password.
The password must meet the following
password policies:
Password length: at least 8 characters
•
at least 1 uppercase letter
•
at least 1 special character
•
at least 1 number
•
command.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02