Functions specific to SCALANCE
3.5 SINEMA RC
3.5.4.6
port
Note
This command is only available with a KEY-PLUG.
Description
With this command, you set the port via which the WBM of the SINEMA RC Server can be
reached.
Requirement
You are in the SINEMARC configuration mode.
The command prompt is as follows:
cli(config-sinemarc)#
Syntax
Call up the command with the following parameters:
port <number(1-65535)>
The parameter has the following meaning:
Parameter
number
Result
The port is configured.
Further notes
You display this setting and other information with the
116
Description
Port number
Range of values / note
Specify the port.
1 ... 65535
command.
show sinemarc
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02