Show Ipsec Conn-Phase1; Show Ipsec Conn-Phase2 - Siemens SCALANCE S615 Configuration Manual
Simatic net industrial ethernet security command line interface
Hide thumbs
Also See for SCALANCE S615:
- Getting started (44 pages) ,
- Manual (36 pages) ,
- Operating instructions manual (80 pages)
Table of Contents
Advertisement
Security and authentication
9.3 IPsec VPN
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsecvpn connections
Result
The configurations are displayed.
9.3.1.3
show ipsec conn-phase1
Description
This command shows the configuration of phase 1 of the IPsecVPN connections.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsec conn-phase1
Result
The configurations are displayed.
9.3.1.4
show ipsec conn-phase2
Description
This command shows the configuration of phase 2 of the IPsecVPN connections.
356
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Hide quick links:
Advertisement
Table of Contents
