Tftp Save - Siemens SCALANCE S615 Configuration Manual

Configuration
2.2 Load and Save
Result
The file types are displayed or the file is downloaded to the device.
Further notes
You configure the name of the file with the
With the "
2.2.5.4

tftp save

Description
With this command, you copy a file from the file system of the device to a TFTP server. The
TFTP protocol is used for the transfer. You can also display a list of available files.
Requirement
● The name of the file is specified
● You are in the LOADSAVE configuration mode.
The command prompt is:
cli(config-loadsave)#
Syntax
Call up the command with the following parameters:
tftp save {showfiles|filetype<filetype>}
The parameters have the following meaning:
Parameter
showfiles
filetype
filetype
Result
The file types are displayed or the file is copied.
Further notes
You configure the name of the file with the
With the "
76
" command, you can display the file types.
show loadsave files
Description
Shows the available files
Keyword for a file type to be loaded
Name of the file type
" command, you can display the file types.
show loadsave files
command.
tftp filename
Range of values / note
-
-
max. 100 characters
command.
tftp filename
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02