Security and authentication
9.2 Firewall
In the Global configuration mode, enter the
● If you exit the FIREWALL configuration mode with the
Global configuration mode.
● If you exit the FIREWALL configuration mode with the
Privileged EXEC mode.
Available interfaces
As the source and destination interfaces, the following interfaces are available:
Interface
VLAN
PPP
(M874,
M876-3)
USB
(M876-4)
IPsecVPN
SINEMA RC Connection to SINEMA RC Server
Device
x: available
- : not available
9.2.4.1
icmp name
Description
With this command, you create an ICMP service. You select a service name and assign the
service parameters to it.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call up the command with the following parameters:
icmp name <string(32)> type <num(0-256)> code <num(0-256)> ver ipv4
314
VLANs with configured subnet
WAN interface EGPRS, GPRS,
UMTS
WAN interface LTE
All IPsecVPN connections
Specific IPsecVPN connection
Connection to the device
command to change to this mode.
firewall
command, you return to the
exit
command, you return to the
end
prede-
own firewall
fined
rules
firewall
rules
x
x
x
x
x
x
-
x
-
x
-
x
-
x
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
vlan (1-x)
ppp 0
usb 0
ipsecALL
ipsec num
sinemarcall
device