Lifebyte - Siemens SCALANCE S615 Configuration Manual

Security and authentication
9.3 IPsec VPN
9.3.8.9

lifebyte

Description
With this command, you configure the data limit to specify the lifetime of the agreed keys.
When the data limit is reached, the key is renegotiated.
Requirement
You are in the IPSEC PHASE configuration mode.
The command prompt is as follows:
cli(config-conn-phs2)#
Syntax
Call up the command with the following parameters:
lifebyte <integer(0-4294967295)>
The parameter has the following meaning:
Parameter
integer
Result
The data limit is configured.
Further notes
You display this setting and other information with the
404
Description
Data limit
Range of values / note
Enter the data limit in bytes.
show ipsec conn-phase2
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
command.