Security and authentication
9.2 Firewall
Result
The list is displayed.
Further notes
You create a protocol with the
9.2.4.5
icmp show-types-codes
Description
With this command, you display the available ICMP packet types and codes.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
cli(config-fw)#
Syntax
Call the command without parameter assignment:
icmp show-types-codes
Result
The list is displayed.
Further notes
You create a protocol with the
9.2.4.6
idle timeout icmp
Description
With this command, you configure the required period for ICMP. If no data exchange takes
place, the ICMP connection is terminated automatically when this time has elapsed.
Requirement
You are in the FIREWALL configuration mode.
The command prompt is as follows:
318
command.
icmp name
command.
icmp name
Configuration Manual, 06/2015, C79000-G8976-C406-02
SCALANCE S615 Command Line Interface