Siemens SCALANCE S615 Configuration Manual page 291

Syntax
Call up the command with the following parameters:
napt srcint <if-type> [<num(0-4094)>] proto {udp|tcp} type ipv4 dstip <auto|ip_addr>
transip <ip_addr> dstport <num(0-65535)> [- <num(0-65535)>] transport <num(0-65535)>
[- <num(0-65535)>]
The parameters have the following meaning:
Parameter
srcint
if-type
num
proto
UDP
TCP
dstip
auto
ip_addr
transip
ip_addr
dstport
num
num
transport
num
num
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
Description
Keyword for the source interface
Type or speed of the interface
Number of the addressed VLAN
Keyword for a protocol
Address assignment for UDP valid.
Address assignment for TCP valid.
Keyword for the destination IP ad-
dress
Uses the IP address of the selected
interface
IPv4 address
Keyword for the IP address of the
node to which this frame will be for-
warded
IPv4 address
Keyword for destination port
Start port
End port
Keyword for the new destination port
Start port
End port
Layer 3 functions
Range of values / note
-
Specify a valid interface.
0 ... 4094
-
-
-
-
-
Enter a valid IPv4 address.
-
Enter a valid IPv4 address.
-
Enter the destination port:
0 ... 65535
•
A specific port:
•
Enter a port e.g.
10
A port range
•
Specify the start port and end port,
e.g.
10 - 20
-
Enter the destination port:
0 ... 65535
•
A specific port:
•
Enter a port e.g.
10
A port range
•
Specify the start port and end port,
e.g.
10 - 20
8.1 NAT
291