Show Coordinates; Show Device Information - Siemens SCALANCE S615 Configuration Manual

Configuration
2.1 System
2.1.1.2

show coordinates

Description
This command shows the system coordinates.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show coordinates
Result
The system coordinates are displayed.
2.1.1.3

show device information

Description
This command shows information about the device.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli>
Syntax
Call the command without parameters:
show device information
38
or
cli#
or
cli#
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02