No Snmp Filterprofile - Siemens SCALANCE S615 Configuration Manual

Network protocols
6.6 SNMP
Parameter
OIDMask
-
-
Note that the meaning of the filter mask changes depending on the "
parameter:
● ...
● ...
● ...
● ...
Result
The filter is created.
Further notes
You delete a filter with the
You display the created filter with the
6.6.2.9

no snmp filterprofile

Description
With this command, you delete a filter.
Requirement
You are in the Global configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
236
Description
Mask that filters access to the elements of
the MIB tree
Specifies whether the filtered elements are
used or excluded
specifies whether the settings remain fol-
lowing a restart:
... and " " means: Access denied
0 included
... and " " means: Access permitted
0 excluded
... and " " means: Access permitted
1 included
... and " " means: Access denied
1 excluded
no snmp filterprofile
Range of values
A series of "
dots in keeping with the path infor-
mation of the MIB tree
•
included
•
excluded
•
volatile
The default settings are used after a
restart
•
nonvolatile
The saved settings are used after a
restart
command.
show snmp filter table
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
" and " " separated by
0 1
(volatile):
(non-volatile):
/
included excluded
command.
"