9.3
IPsec VPN
This section describes commands relevant for IPsec.
9.3.1
The "show" commands
This section describes commands with which you display various settings.
With the command
configuration mode.
To do this, you replace
Example
do show cli-console-timeout
9.3.1.1
show ipsec conn-authentication
Description
This command shows the security settings of the IPsec VPN connections.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameter assignment:
show ipsec conn-authentication
Result
The settings are displayed.
9.3.1.2
show ipsecvpn connections
Description
This command shows the configuration of the IPsecVPN connections.
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
you can execute the "show" commands in every
do [command]
with the "show" command that you want to execute.
[command]
Security and authentication
9.3 IPsec VPN
355