System Name; Commands In The Interface Configuration Mode - Siemens SCALANCE S615 Configuration Manual

Configuration
2.1 System
2.1.9.10

system name

Description
This command, you enter a name for the system.
Requirement
You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
system name <string>
The parameter has the following meaning:
Parameter
string
Result
The name is created in the system.
2.1.10

Commands in the Interface configuration mode

This section describes commands that you can call up in the interface configuration mode.
Depending on the Interface selected, various command sets are available.
In the Global configuration mode, enter the
Commands relating to other topics that can be called in the interface configuration mode can
be found in the relevant sections.
● If you exit the Interface configuration mode with the
Global configuration mode.
● If you exit the Interface configuration mode with the
Privileged EXEC mode.
58
Description
Input box for the name
interface
Range of values / note
max. 255 characters
command to change to this mode.
command, you return to the
exit
command, you return to the
end
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02