Further notes
You display this setting and other information with the
You create the VPN remote station with the
9.3.5.5
operation
Description
With this command, you specify the connection partner that establishes the VPN connection.
Requirement
You are in the IPSEC CONNECTION configuration mode.
The command prompt is as follows:
cli(config-conn-X)#
Syntax
Call up the command with the following parameters:
operation {disabled|start|wait|on-demand}
The parameters have the following meaning:
Parameter
disabled
start
wait
on-demand
Result
The VPN remote station has been configured.
Further notes
You display this setting and other information with the
SCALANCE S615 Command Line Interface
Configuration Manual, 06/2015, C79000-G8976-C406-02
remote-end name
Description
The VPN connection is disabled
The VPN connection is initiated by the local
endpoint.
The VPN connection is established by the re-
mote station.
The VPN connection is established when nec-
essary.
Security and authentication
show ipsec connections
command.
Range of values / note
-
-
-
-
show ipsec connections
9.3 IPsec VPN
command.
command.
375